Security Tronix ST-DVR8708BG Manual de instalación

INSTALLATION MANUAL ST-WD650PTZMINI-12X High Speed Intelligent Dome PTZ Color Camera This is a 12 volt DC camera. Copyright North American Cabl

10 6.1 CAMERA SETUP MENU From the MAIN MENU, use the DOWN button to highlight CAMERA SETUP and use the OPEN button to access the CAMERA SETUP menu. T

11 The SHUTTER / AGC MANUAL sub menu will display: Use the UP, DOWN, LEFT & RIGHT buttons to navigate to the desired function and change the se

12 To use AUTO shutter settings, change the SHUTTER / AGC setting to AUTO and press OPEN to enter the AUTO SHUTTER sub menu: The SHUTTER / AGC AUTO s

13 6.2 WHITE BAL (white balance) MENU From page 1 of the CAMERA SETUP MENU, highlight WHITE BAL to access the white balance functions, which affects

14 Use the LEFT & RIGHT buttons to change the WB LEVEL, then select RETURN and press OPEN to return to the CAMERA SETUP MENU page 1. WHITE BALANC

15 WHITE BALANCE USER 1 & USER 2 MODE: The USER 1 and USER 2 menus are identical in operation and provide the same settings as ATW. Use the LE

16 6.3 BACKLIGHT From page 1 of the CAMERA SETUP MENU select BACKLIGHT and use the LEFT & RIGHT buttons to choose:  OFF – No backlighting compe

17 Use the UP, DOWN, LEFT & RIGHT buttons to select and change the MIRROR, BRIGHTNESS, CONTRAST, SHARPNESS, HUE and GAIN parameters, then select

18 where, for instance, both low-luminance areas and high-luminance areas exist in the same picture. Use the UP, DOWN, LEFT & RIGHT buttons to s

19 6.8 PRIVACY The PRIVACY feature is not implemented on this camera model. 6.9 DAY / NIGHT From page 2 of the CAMERA SETUP MENU select DAY / NIGHT.

2 PACKAGE CONTENTS This package contains: One ST-WD650PTZMINI-12X intelligent dome camera One Mounting Arm One installation manual Note: The ST-

20 NOTE: In most cases using the default values of the DAY / NIGHT AUTO settings is preferred. Use the UP, DOWN, LEFT & RIGHT buttons to select

21 6.11 NR (Noise Reduction) From page 2 of the CAMERA SETUP MENU select NR and press OPEN. The NR sub menu will display: Use the UP, DOWN, LEFT &am

22 6.12 CAMERA ID From page 2 of the CAMERA SETUP MENU select CAMERA ID and select either NO for the camera to not display a name, or ON to display a

23 6.13 LANGUAGE From page 2 of the CAMERA SETUP MENU move the cursor to LANGUAGE and use the LEFT & RIGHT buttons to select a language for the c

24 7.0 FOCUS SETUP MENU From the MAIN MENU, use the DOWN button to highlight FOCUS SETUP and use the OPEN button to access the FOCUS SETUP menu. The

25 7.1 AF (Auto Focus) AFTER MOVE When set to ON, this causes the lens to enact an automatic focus adjustment each time the camera is moved to a new

26 8.0 PAN TILT SETUP From the MAIN MENU, use the DOWN button to highlight PAN TILT SETUP and use the OPEN button to access the sub menu. The PAN TIL

27 8.2 TILT LIMIT SET Tilt limit will set a specific point, beyond which the camera will not tilt. To enable a tilt limit, first exit the menu and us

28 9.0 PATTERN SETUP From the MAIN MENU, use the DOWN button to highlight PATTERN SETUP and use the OPEN button to access the sub menu. The PATTERN S

29 9.2 PATTERN POINT NUM Pattern point number sets the highest preset number which the tour will include. The tour will only include preset numbers

3 SPECIFICATIONS ST-WD650PTZMINI-12X Specifications (Typical) 1.Image Sensor 1/3" Super HAD II Sony Color CCD 2 Resolution Color 650TVL, Black

30 9.4 AUTO RETURN HOME Use the UP & DOWN buttons to select AUTO RETURN HOME and use the LEFT & RIGHT buttons to set it to either START or S

31 10.0 PROTOCOL SETUP NOTE: This menu is used instead of DIP switches to set the communication parameters for the camera. After making a change an

32 9.2 ADDRESS Use the DOWN button to select ADDRESS. Use the LEFT & RIGHT buttons to select an address for the camera. The range is 1 thru 255.

33 11.0 RESET MENU SETUP NOTE: Using these reset commands will delete all user-entered settings in the camera and return it to the factory-default

34 check and/or reset the settings. This will not erase any presets which were stored in the camera. Use the DOWN button to select RESET MENU SETUP.

35 6. TROUBLESHOOTING a. No picture after applying power – (i) check all plugs and cables are connected to the proper connectors: (ii) e

4 INSTALLATION AND OPERATION CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this unit. No user serviceabl

5 3. ASSEMBLY a. Remove the rear mounting plate, using the supplied allen key wrench. b. Guide the camera dome’s wiring harness through the hole

6 WIRING CONNECTIONS a. Connect the power supply’s 12VDC plug to the camera’s power jack. b. Connect the camera’s BNC connector to a DVR (or monit

7 5. SETTING CAMERA ADDRESS, PROTOCOL and BAUD RATE The camera’s address, protocol and baud rate are set using the camera’s On Screen Display menu

8 The PROTOCOL SETUP menu will display: Use the UP & DOWN buttons to select a parameter to change and use the LEFT & RIGHT buttons to chang

9 6.0 On Screen Display (OSD) Menus This camera employs an on screen display system to facilitate making changes to the camera’s settings. The OSD i